| PART |
Description |
Maker |
| 74LVC162374A 74LVC162374ADGG 74LVC162374ADL 74LVC_ |
16-bit edge triggered D-type flip-flop with 30 ohmseries termination resistors; 5 V input/output tolerant; 3-state LVC/LCX/Z SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, PDSO48
Quadruple 2-Line To 1-Line Data Selectors/Multiplexers With 3-State Outputs 16-SOIC -40 to 85
16-bit edge triggered D-type flip-flop with 30Ω series termination resistors, 5V input/output tolerant (3-State)(0Ω系列终端电阻器，5V输入/输出容限6位边沿触发D触发器（三态）)
From old datasheet system
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| 74LVCH16374DGG |
2.5 V/3.3 V 16-bit edge-triggered D-type flip-flop; 3-state
|
NXP Semiconductors
|
| 74LVT16374A 74LVTH16374ABQ 74LVT16374ADGG 74LVT163 |
3.3 V 16-bit edge-triggered D-type flip-flop; 3-state
|
NXP Semiconductors
|
| ST72561 ST72561AR6 ST72561AR9 ST72561J6 ST72561J9 |
8-BIT MCU WITH FLASH OR ROM, 10-BIT ADC, 5 TIMERS, SPI, LINSCI , ACTIVE CAN
16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 48-SSOP -40 to 85
|
意法半导
|
| 74LVT162374DL 74LVT162374DGG 74LVT162374 |
3.3V LVT 16-bit edge-triggered D-type flip-flop with 30 ohm termination resistors 3-State
3.3 V 16-bit edge-triggered D-type flip-flop with 30 OHM termination resistors; 3-state
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| IDT74LVCH16374A 74LVCH16374A_DS_62505 |
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOP
From old datasheet system
|
IDT
|
| PI74ALVCH1 PI74ALVCH16374 |
16-Bit Edge Triggered D-Type Flip-Flop with 3-State Outputs
|
PERICOM[Pericom Semiconductor Corporation]
|
| IDT74LVC16374A 74LVC16374A_DS_68202 |
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOP
From old datasheet system
|
IDT
|
| IDT74LVC16374APA IDT74LVC16374APAG IDT74LVC16374AP |
3.3V CMOS 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
|
Integrated Device Technology
|
| 74LVT162374 74LVT162374DGG 74LVT162374DL |
3.3 V LVT 16-bit edge-triggered D-type flip-flop with 30 Ohm termination resistors (3-State)
3.3V LVT 16-bit edge-triggered D-type flip-flop with 30 ohm termination resistors 3-State
|
Philips Semiconductors
|
| IDT74LVC574A 74LVC574A_DS_31950 IDT74LVC574ASO IDT |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
From old datasheet system
3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O
|
Integrated Device Techn...
IDT[Integrated Device Technology]
|
| IDT80LVC162374APA IDT80LVC162374APF IDT80LVC162374 |
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
|
Integrated Device Techn...
IDT[Integrated Device Technology]
|
